Description
Compact and productive, the VTM BC700S brush chipper consists of a 25-hp (18.6-kW) Kohler ECH740 engine, bottom feed stop bar, centrifugal clutch, wide axle and Vermeer-exclusive SmartFeed feed-sensing control system.
| General Dimensions and Weights | |
|---|---|
| Weight (without winch and hydraulic jack) | 1800 lbs ( 816.5 kg ) |
| Length - Feed Table Up, Tongue In | 113 in ( 287 cm ) |
| Width | 71 in ( 180.3 cm ) |
| Height | 102 in ( 259.1 cm ) |
| Weight - Engine Option One | 1800 lbs ( 816.5 kg ) |
| Length - Table Down, Tongue Extended | 133 in ( 337.8 cm ) |
| Weight (without winch and hydraulic jack) | 1800 lbs ( 816.5 kg ) |
| Length - Feed Table Up, Tongue In | 113 in ( 287 cm ) |
| Width | 71 in ( 180.3 cm ) |
| Height | 102 in ( 259.1 cm ) |
| Weight - Engine Option One | 1800 lbs ( 816.5 kg ) |
| Length - Table Down, Tongue Extended | 133 in ( 337.8 cm ) |
| Engine - Option one | |
|---|---|
| Torque (Max) | 49.3 ft-lb ( 66.8 Nm ) |
| Fuel Tank Capacity | 6 gal ( 22.7 L ) |
| Gross Horsepower (Maximum) | 25 hp ( 18.6 kw ) |
| Oil Volume with Filter | 2 qt ( 1.9 L ) |
| Torque (Max) | 41.7 ft-lb ( 56.5 Nm ) |
| Fuel Tank Capacity | 6 gal ( 22.7 L ) |
| Max Fuel Consumption | 2.4 gph ( 9.1 lph ) |
| Gross Horsepower (Maximum) | 25 hp ( 18.6 kw ) |
| Engine - Option two | |
|---|---|
| Torque (Max) | 41.7 ft-lb ( 56.5 Nm ) |
| Gross Horsepower (Maximum) | 25 hp ( 18.6 kw ) |
| Fuel Tank Capacity | 6 gal ( 22.7 L ) |
| Safety System | |
|---|---|
| Material Thickness | .1 in ( .3 cm ) |
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Diameter | 2 in ( 5.1 cm ) |
| Material Thickness | .1 in ( .3 cm ) |
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Diameter | 2 in ( 5.1 cm ) |
| Drum/Disc Cutting System | |
|---|---|
| Knife Thickness | .6 in ( 1.5 cm ) |
| Material Capacity | 6 in ( 15.2 cm ) |
| Width | 8 in ( 20.3 cm ) |
| Diameter | 23.9 in ( 60.7 cm ) |
| Thickness | 1.3 in ( 3.2 cm ) |
| Weight With Shaft | 176 lbs ( 79.8 kg ) |
| Knife Thickness | .6 in ( 1.5 cm ) |
| Material Capacity | 6 in ( 15.2 cm ) |
| Width | 8 in ( 20.3 cm ) |
| Diameter | 23.9 in ( 60.7 cm ) |
| Thickness | 1.3 in ( 3.2 cm ) |
| Weight With Shaft | 176 lbs ( 79.8 kg ) |
| Cutter Drive Components - Engine Option One | |
|---|---|
| Static Capacity | 4460 lbs ( 2023 kg ) |
| Bore | 1.5 in ( 3.8 cm ) |
| Dynamic Capacity | 5640 lbs ( 2558.3 kg ) |
| Static Capacity | 4460 lbs ( 2023 kg ) |
| Bore | 1.5 in ( 3.8 cm ) |
| Dynamic Capacity | 5640 lbs ( 2558.3 kg ) |
| Feed System | |
|---|---|
| Feed Roller Clamp Load | 525 lbs ( 238.1 kg ) |
| Distance from Feed Table to Ground | 28.1 in ( 71.4 cm ) |
| Infeed Table Width | 41.2 in ( 104.6 cm ) |
| Infeed Table Length | 30.2 in ( 76.7 cm ) |
| Weight of Feed Roller | 100 lbs ( 45.4 kg ) |
| Feed Roller Minimum Distance to Drum | 4 in ( 10.2 cm ) |
| Infeed Hopper Height | 22.1 in ( 56.1 cm ) |
| Pinch Point - Distance to End of Feed Table | 65.4 in ( 166.1 cm ) |
| Feed Roller Clamp Load | 525 lbs ( 238.1 kg ) |
| Distance from Feed Table to Ground | 28.1 in ( 71.4 cm ) |
| Infeed Table Width | 41.2 in ( 104.6 cm ) |
| Infeed Table Length | 30.2 in ( 76.7 cm ) |
| Weight of Feed Roller | 100 lbs ( 45.4 kg ) |
| Feed Roller Minimum Distance to Drum | 4 in ( 10.2 cm ) |
| Infeed Hopper Height | 22.1 in ( 56.1 cm ) |
| Pinch Point - Distance to End of Feed Table | 65.4 in ( 166.1 cm ) |
| Discharge System | |
|---|---|
| Top Thickness | .1 in ( .3 cm ) |
| Bottom Thickness | .1 in ( .3 cm ) |
| Side Wall Thickness | .1 in ( .3 cm ) |
| Chute Height | 97.2 in ( 246.9 cm ) |
| Deflector Thickness | .1 in ( .3 cm ) |
| Top Thickness | .1 in ( .3 cm ) |
| Bottom Thickness | .1 in ( .3 cm ) |
| Side Wall Thickness | .1 in ( .3 cm ) |
| Chute Height | 97.2 in ( 246.9 cm ) |
| Deflector Thickness | .1 in ( .3 cm ) |
| Hydraulic System | |
|---|---|
| Pump Flow at Maximum RPM | 3.8 gpm ( 14.4 L/min ) |
| Tank capacity | 6.8 gal ( 25.7 L ) |
| System relief pressure | 2500 psi ( 172.4 bar ) |
| Pump Flow at Maximum RPM | 3.8 gpm ( 14.4 L/min ) |
| Tank capacity | 6.8 gal ( 25.7 L ) |
| System relief pressure | 2500 psi ( 172.4 bar ) |