Durable equipment for tough wood debris-clearing and processing jobs.
Using the BC1000S brush chipper by VTM, you can tackle challenging wood clearing and wood waste processing with ease. Comprising of a Cummins QSF2.8 turbo engine, the BC1000S has a gross horsepower of 72 hp (53.7 kW).
It also has a fuel tank capacity of 25 gal (94.6 L), hence allowing it to be operated for long periods of time.
On top of that, the BC1000S brush chipper has an exclusive four-knife option that was developed by VTM to meet the demand for smaller wood chips.
| General Dimensions and Weights | |
|---|---|
| Weight (without winch and hydraulic jack) | 6063 lbs ( 2750.1 kg ) |
| Length - Feed Table Up, Tongue In | 177.2 in ( 450.1 cm ) |
| Width | 68.9 in ( 175 cm ) |
| Height | 100.8 in ( 256 cm ) |
| Weight - Engine Option One | 6063 lbs ( 2750.1 kg ) |
| Length - Table Down, Tongue Extended | 198 in ( 502.9 cm ) |
| Engine - Option one | |
|---|---|
| Oil Volume with Filter | 8.5 qt ( 8 L ) |
| Torque (Max) | 184.4 ft-lb ( 250 Nm ) |
| Fuel Tank Capacity | 25 gal ( 94.6 L ) |
| Gross Horsepower (Maximum) | 72 hp ( 53.7 kw ) |
| Coolant Capacity (Engine and Radiator) | 2.3 gal ( 8.7 L ) |
| Safety System | |
|---|---|
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Actuation Force | 34 lbs ( 15.4 kg ) |
| Actuation Force (BFSB) | 34 lbs ( 15.4 kg ) |
| Drum/Disc Cutting System | |
|---|---|
| Knife Thickness | .6 in ( 1.5 cm ) |
| Material Capacity | 12 in ( 30.5 cm ) |
| Bedknife Thickness | 1 in ( 2.5 cm ) |
| Width | 20 in ( 50.8 cm ) |
| Diameter | 20 in ( 50.8 cm ) |
| Thickness | .4 in ( 1 cm ) |
| Weight With Shaft | 460 lbs ( 208.7 kg ) |
| Cutter Drive Components - Engine Option One | |
|---|---|
| Static Capacity | 53500 lbs ( 24267.2 kg ) |
| Bore | 2.4 in ( 6.1 cm ) |
| Dynamic Capacity | 31400 lbs ( 14242.8 kg ) |
| Feed System | |
|---|---|
| Feed Roller Clamp Load | 350 lbs ( 158.8 kg ) |
| Distance from Feed Table to Ground | 26 in ( 66 cm ) |
| Infeed Table Material Thickness | .2 in ( .5 cm ) |
| Infeed Table Width | 52 in ( 132.1 cm ) |
| Infeed Table Length | 32 in ( 81.3 cm ) |
| Weight of Feed Roller | 400 lbs ( 181.4 kg ) |
| Feed Roller Minimum Distance to Drum | 1 in ( 2.5 cm ) |
| Infeed Hopper Height | 12 in ( 30.5 cm ) |
| Pinch Point - Distance to End of Feed Table | 66.5 in ( 168.9 cm ) |
| Discharge System | |
|---|---|
| Chute Height | 96.9 in ( 246.1 cm ) |
| Hydraulic System | |
|---|---|
| Pump Flow at Maximum RPM | 2.7 gpm ( 10.2 L/min ) |
| Tank capacity | 7 gal ( 26.5 L ) |
| System relief pressure | 2500 psi ( 172.4 bar ) |