Process wood waste more efficiently with the HG6000TX horizontal grinder.
Self-propels into the most remote jobsites on 20-in (50.8-cm) or 24-in (61-cm) double grouser track pads. High ground clearance and sealed rollers help keep material from building up in the track system. State-of-the-art wireless remote lets you operate the machine from up to 300 ft (91.4 m) away. An optional discharge blower system distributes processed wood over a large area or can fill a covered trailer from the rear end.
| Tracks | |
|---|---|
| Low Speed Travel in Creep Mode | 1 mph ( 1.6 km/h ) |
| Maximum Speed | 2.6 mph ( 4.2 km/h ) |
| System relief pressure | 5000 psi ( 344.7 bar ) |
| Pump Flow at Maximum RPM | 43 gpm ( 162.8 L/min ) |
| Track Width Option Two - Ground Bearing Pressure - Option Two | 72.2 psi ( 497.8 kPa ) |
| Track Width Option Two - Ground Bearing Pressure - Option | 13.2 psi ( 91 kPa ) |
| Track Width Option One - Ground Bearing Pressure - Soft Ground | 10.2 psi ( 70.3 kPa ) |
| Track Width Option One - Ground Bearing Pressure - Hard Ground | 55.6 psi ( 383.3 kPa ) |
| Engine - Option one | |
|---|---|
| Coolant Capacity (Engine and Radiator) | 22.6 gal ( 85.6 L ) |
| Oil Volume with Filter | 36 qt ( 34.1 L ) |
| Max Fuel Consumption | 38.3 gph ( 145 lph ) |
| Fuel Tank Capacity | 350 gal ( 1324.9 L ) |
| Torque (Max) | 2582 ft-lb ( 3500.7 Nm ) |
| Gross Horsepower (Maximum) | 755 hp ( 563 kw ) |
| Engine - Option two | |
|---|---|
| Coolant Capacity (Engine and Radiator) | 22.6 gal ( 85.6 L ) |
| Oil Volume with Filter | 36 qt ( 34.1 L ) |
| Max Fuel Consumption | 39.5 gph ( 149.5 lph ) |
| Fuel Tank Capacity | 350 gal ( 1324.9 L ) |
| Torque (Max) | 2582 ft-lb ( 3500.7 Nm ) |
| Gross Horsepower (Maximum) | 755 hp ( 563 kw ) |
| Engine - Option three | |
|---|---|
| Coolant Capacity (Engine and Radiator) | 21.3 gal ( 80.6 L ) |
| Oil Volume with Filter | 36 qt ( 34.1 L ) |
| Max Fuel Consumption | 34.6 gph ( 131 lph ) |
| Fuel Tank Capacity | 350 gal ( 1324.9 L ) |
| Torque (Max) | 2041 ft-lb ( 2767.2 Nm ) |
| Gross Horsepower (Maximum) | 630 hp ( 469.8 kw ) |
| Standard Infeed System | |
|---|---|
| Infeed roller weight with arm | 3350 lbs ( 1519.5 kg ) |
| Duplex Drum | |
|---|---|
| Drum Weight | 4741 lbs ( 2150.5 kg ) |
| Bearing - Inner Race Diameter | 5.5 in ( 14 cm ) |
| Drum Skin Thickness | 1.5 in ( 3.8 cm ) |
| Drum Cutting Width | 62.4 in ( 158.5 cm ) |
| Drum Diameter | 28 in ( 71.1 cm ) |
| Tip Diameter | 36.4 in ( 92.5 cm ) |
| Screens | |
|---|---|
| Screen Area | 3317 sq in ( 21400 sq cm ) |
| Screen Weight | 470 lbs ( 213.2 kg ) |
| Discharge System - Single Belt Design | |
|---|---|
| Load Height | 14 ft ( 4.3 m ) |
| Belt Speed | 780 ft/min ( 237.7 m/min ) |
| Magnetic Drive Roller Diameter | 12.8 in ( 32.5 cm ) |
| Standard Drive Roller Diameter | 12.8 in ( 32.5 cm ) |
| Idler Roller Diameter | 12 in ( 30.5 cm ) |
| Width | 48 in ( 121.9 cm ) |
| Length | 81.3 ft ( 24.8 m ) |
| Discharge Conveyor Hydraulics | |
|---|---|
| Pump Flow at Maximum RPM | 25.7 gpm ( 97.3 L/min ) |
| Fan Drive Hydraulics | |
|---|---|
| Pump Flow at Maximum RPM | 36.2 gpm ( 137 L/min ) |
| Clutch | |
|---|---|
| System relief pressure | 260 psi ( 17.9 bar ) |
| Pump Flow at Maximum RPM | 12.4 gpm ( 46.9 L/min ) |
| Tank capacity | 18 gal ( 68.1 L ) |
| Axle/Suspension | |
|---|---|
| Ground Clearance - Option One | 5.3 in ( 13.5 cm ) |
| Capacity per Axle | 20000 lbs ( 9071.8 kg ) |
| Optional Air Compressor | |
|---|---|
| Tank capacity (5th wheel) | 30 gal ( 113.6 L ) |
| Maximum Pressure | 175 psi ( 12.1 bar ) |
| Maximum Air Flow | 29 cfm ( .8 cmm ) |
| Hydraulic System | |
|---|---|
| Tank capacity | 100 gal ( 378.5 L ) |
| General Dimensions and Lengths - Long Infeed | |
|---|---|
| Dolly Weight | 9500 lbs ( 4309.1 kg ) |
| Axle Weight - Engine Option 1 with Dolly | 48910 lbs ( 22185.2 kg ) |
| Tongue Weight - Engine Option 1 with Dolly | 37590 lbs ( 17050.5 kg ) |
| Weight | 75000 lbs ( 34019.4 kg ) |
| Maximum Height Transport with Dolly | 154.8 in ( 393.2 cm ) |
| Maximum Width Transport - with Dolly | 9.8 ft ( 3 m ) |
| Maximum Length (Operation) | 54.5 ft ( 16.6 m ) |
| Maximum Length - Transport with Dolly | 45.8 ft ( 14 m ) |
| Maximum Length - Transport | 37.3 ft ( 11.4 m ) |
| Chipper Drum | |
|---|---|
| Shaft diameter | 6.5 in ( 16.5 cm ) |
| Drum Weight | 5946 lbs ( 2697.1 kg ) |
| Bearing - Inner Race Diameter | 5.5 in ( 14 cm ) |
| Drum Skin Thickness | 1.5 in ( 3.8 cm ) |
| Drum Diameter | 34.3 in ( 87.1 cm ) |
| Drum Cutting Width | 63 in ( 160 cm ) |
| Heavy-duty Infeed System | |
|---|---|
| Infeed roller weight with arm | 3483 lbs ( 1579.9 kg ) |