When it comes to power and productivity, the AX19 Vermeer brush chipper is designed with robust features to expand your job possibilities.
Equipped with mechanical feeding capabilities and a 173-hp (123-kW) John Deere diesel engine, this unit will efficiently work in large land-clearing operations or on a rural jobsite. The AX19 features up to 12,000 lb (5443.1kg) of pull-in force with the support of the patented SmartCrush control system, allowing you to feed large-diameter logs or branchy limbs with minimal effort. With no two jobs alike, the AX19 is built to finish the challenge.
| General Dimensions and Weights | |
|---|---|
| Weight with outriggers (additional) | 170 lbs ( 77.1 kg ) |
| Weight (with winch, hydraulic jack and hydraulic chute) | 11400 lbs ( 5171 kg ) |
| Weight (without winch and hydraulic jack) | 11000 lbs ( 4989.5 kg ) |
| Length - Feed Table Up, Tongue In | 224 in ( 569 cm ) |
| Width | 79 in ( 200.7 cm ) |
| Height | 108 in ( 274.3 cm ) |
| Length - Table Down, Tongue Extended | 236 in ( 599.4 cm ) |
| Weight with outriggers (additional) | 170 lbs ( 77.1 kg ) |
| Weight (with winch, hydraulic jack and hydraulic chute) | 11400 lbs ( 5171 kg ) |
| Weight (without winch and hydraulic jack) | 11000 lbs ( 4989.5 kg ) |
| Width | 79 in ( 200.7 cm ) |
| Height | 108 in ( 274.3 cm ) |
| Engine - Option one | |
|---|---|
| Oil Volume with Filter | 15.5 qt ( 14.7 L ) |
| Torque (Max) | 492 ft-lb ( 667.1 Nm ) |
| Fuel Tank Capacity | 40 gal ( 151.4 L ) |
| Max Fuel Consumption | 6.8 gph ( 25.7 lph ) |
| Gross Horsepower (Maximum) | 173 hp ( 129 kw ) |
| Coolant Capacity (Engine and Radiator) | 32 gal ( 121.1 L ) |
| Oil Volume with Filter | 15.5 qt ( 14.7 L ) |
| Torque (Max) | 492 ft-lb ( 667.1 Nm ) |
| Fuel Tank Capacity | 40 gal ( 151.4 L ) |
| Max Fuel Consumption | 6.8 gph ( 25.7 lph ) |
| Gross Horsepower (Maximum) | 173 hp ( 129 kw ) |
| Coolant Capacity (Engine and Radiator) | 32 gal ( 121.1 L ) |
| Safety System | |
|---|---|
| Material Thickness | 11 in ( 27.9 cm ) |
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Actuation Force | 34 lbs ( 15.4 kg ) |
| Actuation Force (BFSB) | 34 lbs ( 15.4 kg ) |
| Diameter | 1.5 in ( 3.8 cm ) |
| Material Thickness | 11 in ( 27.9 cm ) |
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Actuation Force | 34 lbs ( 15.4 kg ) |
| Actuation Force (BFSB) | 34 lbs ( 15.4 kg ) |
| Diameter | 1.5 in ( 3.8 cm ) |
| Drum/Disc Cutting System | |
|---|---|
| Knife Thickness | .6 in ( 1.6 cm ) |
| Material Capacity | 19 in ( 48.3 cm ) |
| Bedknife Thickness | 1.3 in ( 3.2 cm ) |
| Width | .5 in ( 1.3 cm ) |
| Diameter | 36 in ( 91.4 cm ) |
| Thickness | 26.1 in ( 66.3 cm ) |
| Weight With Shaft | 1160 lbs ( 526.2 kg ) |
| Knife Thickness | .6 in ( 1.6 cm ) |
| Material Capacity | 19 in ( 48.3 cm ) |
| Bedknife Thickness | 1.3 in ( 3.2 cm ) |
| Width | .5 in ( 1.3 cm ) |
| Diameter | 36 in ( 91.4 cm ) |
| Thickness | 26.1 in ( 66.3 cm ) |
| Weight With Shaft | 1160 lbs ( 526.2 kg ) |
| Cutter Drive Components - Engine Option One | |
|---|---|
| Static Capacity | 53500 lbs ( 24267.2 kg ) |
| Bore | 2.5 in ( 6.4 cm ) |
| Dynamic Capacity | 31400 lbs ( 14242.8 kg ) |
| Static Capacity | 53500 lbs ( 24267.2 kg ) |
| Bore | 2.5 in ( 6.4 cm ) |
| Dynamic Capacity | 31400 lbs ( 14242.8 kg ) |
| Winch Option | |
|---|---|
| Winch Relief System | 2300 psi ( 158.6 bar ) |
| Rope Line Pull | 3250 lbs ( 1474.2 kg ) |
| Rope Length | 150 ft ( 45.7 m ) |
| Winch Relief System | 2300 psi ( 158.6 bar ) |
| Rope Line Pull | 3250 lbs ( 1474.2 kg ) |
| Rope Length | 150 ft ( 45.7 m ) |
| Feed System | |
|---|---|
| Feed Roller Clamp Load | 4000 lbs ( 1814.4 kg ) |
| Distance from Feed Table to Ground | 30.3 in ( 77 cm ) |
| Infeed Table Material Thickness | .3 in ( .6 cm ) |
| Infeed Table Width | 71 in ( 180.3 cm ) |
| Infeed Table Length | 60.5 in ( 153.7 cm ) |
| Weight of Feed Roller | 350 lbs ( 158.8 kg ) |
| Feed Roller Minimum Distance to Drum | 5 in ( 12.7 cm ) |
| Infeed Hopper Height | 35 in ( 88.9 cm ) |
| Weight of Feed Roller (Option Two) | 186 lbs ( 84.4 kg ) |
| Feed Roller Clamp Load | 4000 lbs ( 1814.4 kg ) |
| Distance from Feed Table to Ground | 30.3 in ( 77 cm ) |
| Infeed Table Material Thickness | .3 in ( .6 cm ) |
| Infeed Table Width | 71 in ( 180.3 cm ) |
| Infeed Table Length | 60.5 in ( 153.7 cm ) |
| Weight of Feed Roller | 350 lbs ( 158.8 kg ) |
| Feed Roller Minimum Distance to Drum | 5 in ( 12.7 cm ) |
| Infeed Hopper Height | 35 in ( 88.9 cm ) |
| Weight of Feed Roller (Option Two) | 186 lbs ( 84.4 kg ) |
| Discharge System | |
|---|---|
| Top Thickness | .2 in ( .5 cm ) |
| Bottom Thickness | .1 in ( .2 cm ) |
| Side Wall Thickness | .1 in ( .3 cm ) |
| Chute Height | 108 in ( 274.3 cm ) |
| Deflector Thickness | .1 in ( .2 cm ) |
| Top Thickness | .2 in ( .5 cm ) |
| Bottom Thickness | .1 in ( .2 cm ) |
| Side Wall Thickness | .1 in ( .3 cm ) |
| Chute Height | 108 in ( 274.3 cm ) |
| Deflector Thickness | .1 in ( .2 cm ) |
| Hydraulic System | |
|---|---|
| Pump Flow at Maximum RPM | 14.8 gpm ( 56 L/min ) |
| Tank capacity | 20 gal ( 75.7 L ) |
| System relief pressure | 3000 psi ( 206.8 bar ) |
| Auto Reverse PSI | 2800 psi ( 193.1 bar ) |
| Pump Flow at Maximum RPM | 14.8 gpm ( 56 L/min ) |
| Tank capacity | 20 gal ( 75.7 L ) |
| System relief pressure | 3000 psi ( 206.8 bar ) |
| Auto Reverse PSI | 2800 psi ( 193.1 bar ) |