When there’s tough brush-clearing work to do, you can count on a Vermeer BC1200XL to handle it.
| General Dimensions and Weights | |
|---|---|
| Weight With Winch (Additional) | 5600 lbs ( 2540.1 kg ) |
| Weight - Engine Option Two | 5300 lbs ( 2404 kg ) |
| Length - Feed Table Up, Tongue In | 168 in ( 426.7 cm ) |
| Tongue Weight - Engine Option Two | 660 lbs ( 299.4 kg ) |
| Width | 79 in ( 200.7 cm ) |
| Height | 103 in ( 261.6 cm ) |
| Weight - Engine Option One | 5325 lbs ( 2415.4 kg ) |
| Length with Winch (Additional) | 206 in ( 523.2 cm ) |
| Length - Table Down, Tongue Extended | 206 in ( 523.2 cm ) |
| Tongue Weight - Engine Option One | 660 lbs ( 299.4 kg ) |
| Engine - Option one | |
|---|---|
| Oil Volume with Filter | 9 qt ( 8.5 L ) |
| Torque (Max) | 306 ft-lb ( 414.9 Nm ) |
| Fuel Tank Capacity | 25 gal ( 94.6 L ) |
| Max Fuel Consumption | 7.1 gph ( 26.9 lph ) |
| Gross Horsepower (Maximum) | 120 hp ( 89.5 kw ) |
| Coolant Capacity (Engine and Radiator) | 2.5 gal ( 9.5 L ) |
| Engine - Option two | |
|---|---|
| Oil Volume with Filter | 9 qt ( 8.5 L ) |
| Torque (Max) | 304 ft-lb ( 412.2 Nm ) |
| Max Fuel Consumption | 6.1 gph ( 23.1 lph ) |
| Gross Horsepower (Maximum) | 110 hp ( 82 kw ) |
| Coolant Capacity (Engine and Radiator) | 2.5 gal ( 9.5 L ) |
| Fuel Tank Capacity | 25 gal ( 94.6 L ) |
| Safety System | |
|---|---|
| Material Thickness | .1 in ( 0.3 cm ) |
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Actuation Force | 34 lbs ( 15.4 kg ) |
| Actuation Force (BFSB) | 34 lbs ( 15.4 kg ) |
| Diameter | 2 in ( 5.1 cm ) |
| Drum/Disc Cutting System | |
|---|---|
| Knife Thickness | .6 in ( 1.6 cm ) |
| Material Capacity | 13.3 in ( 33.7 cm ) |
| Bedknife Thickness | 1 in ( 2.5 cm ) |
| Width | 20 in ( 50.8 cm ) |
| Diameter | 20 in ( 50.8 cm ) |
| Thickness | .4 in ( 1 cm ) |
| Weight With Shaft | 480 lbs ( 217.7 kg ) |
| Cutter Drive Components - Engine Option One | |
|---|---|
| Static Capacity | 53500 lbs ( 24267.2 kg ) |
| Bore | 2.4 in ( 6.2 cm ) |
| Dynamic Capacity | 31400 lbs ( 14242.8 kg ) |
| Cutter Drive Components - Engine Option Two | |
|---|---|
| Static Capacity | 53500 lbs ( 24267.2 kg ) |
| Dynamic Capacity | 31400 lbs ( 14242.8 kg ) |
| Bore | 2.4 in ( 6.2 cm ) |
| Winch Option | |
|---|---|
| Winch Relief System | 2200 psi ( 151.7 bar ) |
| Rope Line Pull | 2000 lbs ( 907.2 kg ) |
| Rope Length | 150 ft ( 45.7 m ) |
| Feed System | |
|---|---|
| Feed Roller Clamp Load | 2650 lbs ( 1202 kg ) |
| Distance from Feed Table to Ground | 27.2 in ( 69.1 cm ) |
| Infeed Table Material Thickness | .2 in ( .5 cm ) |
| Infeed Table Width | 52 in ( 132.1 cm ) |
| Infeed Table Length | 30.1 in ( 76.5 cm ) |
| Weight of Feed Roller | 150 lbs ( 68 kg ) |
| Feed Roller Minimum Distance to Drum | 1 in ( 2.5 cm ) |
| Infeed Hopper Height | 32 in ( 81.3 cm ) |
| Pinch Point - Distance to End of Feed Table | 67.4 in ( 171.2 cm ) |
| Weight of Feed Roller (Option Two) | 80 lbs ( 36.3 kg ) |
| Discharge System | |
|---|---|
| Top Thickness | .1 in ( 0.3 cm ) |
| Bottom Thickness | .1 in ( .2 cm ) |
| Side Wall Thickness | .1 in ( 0.3 cm ) |
| Chute Height | 104 in ( 264.2 cm ) |
| Deflector Thickness | .1 in ( 0.3 cm ) |
| Hydraulic System | |
|---|---|
| Pump Flow at Maximum RPM | 4.1 gpm ( 15.7 L/min ) |
| Tank capacity | 12 gal ( 45.4 L ) |
| System relief pressure | 2500 psi ( 172.4 bar ) |
| Auto Reverse PSI | 2500 psi ( 172.4 bar ) |