Tackle wood waste measuring up to 19 in (48.3 cm) with the powerful BC1800XL.
Three engine options ranging from 110 hp to 170 hp (82 kW to127 kW) allows you to select your ideal level of power. Patented SmartFeed control system monitors engine performance, and then either reverses or stops the vertical feed rollers as needed. Add on an optional winch with a 150-ft (45.7-m) line to move logs up to 2000 lb (907.2 kg) onto the feed table.
| General Dimensions and Weights | |
|---|---|
| Weight - Engine Option Three | 8740 lbs ( 3964.4 kg ) |
| Weight - Engine Option Two | 8740 lbs ( 3964.4 kg ) |
| Length - Feed Table Up, Tongue In | 177 in ( 449.6 cm ) |
| Width | 78.5 in ( 199.4 cm ) |
| Height | 107 in ( 271.8 cm ) |
| Weight - Engine Option One | 8740 lbs ( 3964.4 kg ) |
| Length - Table Down, Tongue Extended | 231 in ( 586.7 cm ) |
| Tongue Weight - Engine Option One | 900 lbs ( 408.2 kg ) |
| Engine - Option one | |
|---|---|
| Torque (Max) | 360 ft-lb ( 488.1 Nm ) |
| Fuel Tank Capacity | 35 gal ( 132.5 L ) |
| Gross Horsepower (Maximum) | 110 hp ( 82 kw ) |
| Engine - Option two | |
|---|---|
| Torque (Max) | 459 ft-lb ( 622.3 Nm ) |
| Gross Horsepower (Maximum) | 130 hp ( 96.9 kw ) |
| Fuel Tank Capacity | 35 gal ( 132.5 L ) |
| Engine - Option three | |
|---|---|
| Oil Volume with Filter | 17 qt ( 16.1 L ) |
| Gross Horsepower (Maximum) | 170 hp ( 126.8 kw ) |
| Coolant Capacity (Engine and Radiator) | 8 gal ( 30.3 L ) |
| Torque (Max) | 460 ft-lb ( 623.7 Nm ) |
| Fuel Tank Capacity | 35 gal ( 132.5 L ) |
| Safety System | |
|---|---|
| Material Thickness | 11 in ( 27.9 cm ) |
| Bottom Feed Stop Bar Diameter | 2 in ( 5.1 cm ) |
| Actuation Force | 34 lbs ( 15.4 kg ) |
| Actuation Force (BFSB) | 34 lbs ( 15.4 kg ) |
| Diameter | 2 in ( 5.1 cm ) |
| Drum/Disc Cutting System | |
|---|---|
| Knife Thickness | .6 in ( 1.6 cm ) |
| Material Capacity | 19 in ( 48.3 cm ) |
| Bedknife Thickness | 1.5 in ( 3.8 cm ) |
| Width | 26.5 in ( 67.3 cm ) |
| Diameter | 36 in ( 91.4 cm ) |
| Thickness | .4 in ( 1 cm ) |
| Weight With Shaft | 850 lbs ( 385.6 kg ) |
| Cutter Drive Components - Engine Option One | |
|---|---|
| Static Capacity | 53500 lbs ( 24267.2 kg ) |
| Bore | 2.4 in ( 6.2 cm ) |
| Dynamic Capacity | 31400 lbs ( 14242.8 kg ) |
| Cutter Drive Components - Engine Option Two | |
|---|---|
| Static Capacity | 71500 lbs ( 32431.9 kg ) |
| Dynamic Capacity | 41800 lbs ( 18960.2 kg ) |
| Bore | 2.9 in ( 7.5 cm ) |
| Winch Option | |
|---|---|
| Winch Relief System | 2500 psi ( 172.4 bar ) |
| Rope Line Pull | 2000 lbs ( 907.2 kg ) |
| Rope Length | 150 ft ( 45.7 m ) |
| Feed System | |
|---|---|
| Feed Roller Clamp Load | 380 lbs ( 172.4 kg ) |
| Distance from Feed Table to Ground | 30.5 in ( 77.5 cm ) |
| Infeed Table Material Thickness | .2 in ( .5 cm ) |
| Infeed Table Width | 20 in ( 50.8 cm ) |
| Infeed Table Length | 32 in ( 81.3 cm ) |
| Weight of Feed Roller | 116 lbs ( 52.6 kg ) |
| Infeed Hopper Height | 24 in ( 61 cm ) |
| Pinch Point - Distance to End of Feed Table | 62.5 in ( 158.8 cm ) |
| Weight of Feed Roller (Option Two) | 116 lbs ( 52.6 kg ) |
| Discharge System | |
|---|---|
| Top Thickness | .1 in ( .2 cm ) |
| Bottom Thickness | 270 in ( 685.8 cm ) |
| Side Wall Thickness | .1 in ( 0.3 cm ) |
| Chute Height | 110 in ( 279.4 cm ) |
| Deflector Thickness | .1 in ( 0.3 cm ) |
| Hydraulic System | |
|---|---|
| Pump Flow at Maximum RPM | 7.8 gpm ( 29.6 L/min ) |
| Tank capacity | 12 gal ( 45.4 L ) |
| System relief pressure | 2500 psi ( 172.4 bar ) |
| Auto Reverse PSI | 2400 psi ( 165.5 bar ) |