BC230 Brush Chipper

The BC230 is built tough to support your daily operations and surpass expectations.

SKU: 14501 Categories: , , ,

Description

The BC230 brush chipper combines a 55-kW (74-hp) Stage V Caterpillar diesel engine with a 23-cm x 35.5-cm (9-in x 14-in) infeed opening to provide superior feeding performance for dealing with heavily branched material. The twin horizontal feed rollers with offset 40-cm (15.7-in) diameter upper roller allows large short lengths to be fed without kickup that reduces the workload and effort for the operator.

General Dimensions and Weights
Length - Feed Table Up, Tongue In151 in ( 383.5 cm )
Width74 in ( 188 cm )
Height103 in ( 261.6 cm )
Weight - Engine Option One4740 lbs ( 2150 kg )
Length - Table Down, Tongue Extended165 in ( 419.1 cm )
Tongue Weight - Engine Option One220 lbs ( 99.8 kg )
Engine - Option one
Oil Volume with Filter11.6 qt ( 11 L )
Torque (Max)200 ft-lb ( 271.2 Nm )
Fuel Tank Capacity13 gal ( 49.2 L )
Max Fuel Consumption2.4 gph ( 9 lph )
Gross Horsepower (Maximum)74 hp ( 55.2 kw )
Coolant Capacity (Engine and Radiator)1.7 gal ( 6.4 L )
Safety System
Bottom Feed Stop Bar Diameter2 in ( 5.1 cm )
Actuation Force (BFSB)33.1 lbs ( 15 kg )
Drum/Disc Cutting System
Knife Thickness.6 in ( 1.6 cm )
Material Capacity9 in ( 22.9 cm )
Bedknife Thickness.8 in ( 1.9 cm )
Diameter30 in ( 76.2 cm )
Thickness1 in ( 2.5 cm )
Weight With Shaft337 lbs ( 152.9 kg )
Cutter Drive Components - Engine Option One
Static Capacity44400 lbs ( 20139.5 kg )
Bore2.2 in ( 5.6 cm )
Dynamic Capacity32500 lbs ( 14741.8 kg )
Feed System
Feed Roller Clamp Load1086 lbs ( 492.6 kg )
Distance from Feed Table to Ground30 in ( 76.2 cm )
Infeed Table Material Thickness.2 in ( .5 cm )
Infeed Table Width49 in ( 124.5 cm )
Infeed Table Length25 in ( 63.5 cm )
Weight of Feed Roller85 lbs ( 38.6 kg )
Feed Roller Minimum Distance to Drum5 in ( 12.7 cm )
Infeed Hopper Height32 in ( 81.3 cm )
Pinch Point - Distance to End of Feed Table63 in ( 160 cm )
Weight of Feed Roller (Option Two)48 lbs ( 21.8 kg )
Discharge System
Top Thickness.1 in ( .3 cm )
Bottom Thickness.1 in ( .3 cm )
Side Wall Thickness.1 in ( .3 cm )
Chute Height98 in ( 248.9 cm )
Deflector Thickness.1 in ( .2 cm )
Hydraulic System
Pump Flow at Maximum RPM4 gpm ( 15.1 L/min )
Tank capacity6.8 gal ( 25.7 L )
System relief pressure3000 psi ( 206.8 bar )
Auto Reverse PSI2300 psi ( 158.6 bar )

    REQUEST A QUOTE

    By submitting this form, you agree to the Terms of Use & our Privacy Policy