BC700S Brush Chipper

Maximize chipping productivity

SKU: 14538 Categories: , , ,

Description

Compact and productive, the VTM BC700S brush chipper consists of a 25-hp (18.6-kW) Kohler ECH740 engine, bottom feed stop bar, centrifugal clutch, wide axle and Vermeer-exclusive SmartFeed feed-sensing control system.

General Dimensions and Weights
Weight (without winch and hydraulic jack)1800 lbs ( 816.5 kg )
Length - Feed Table Up, Tongue In113 in ( 287 cm )
Width71 in ( 180.3 cm )
Height102 in ( 259.1 cm )
Weight - Engine Option One1800 lbs ( 816.5 kg )
Length - Table Down, Tongue Extended133 in ( 337.8 cm )
Weight (without winch and hydraulic jack)1800 lbs ( 816.5 kg )
Length - Feed Table Up, Tongue In113 in ( 287 cm )
Width71 in ( 180.3 cm )
Height102 in ( 259.1 cm )
Weight - Engine Option One1800 lbs ( 816.5 kg )
Length - Table Down, Tongue Extended133 in ( 337.8 cm )
Engine - Option one
Torque (Max)49.3 ft-lb ( 66.8 Nm )
Fuel Tank Capacity6 gal ( 22.7 L )
Gross Horsepower (Maximum)25 hp ( 18.6 kw )
Oil Volume with Filter2 qt ( 1.9 L )
Torque (Max)41.7 ft-lb ( 56.5 Nm )
Fuel Tank Capacity6 gal ( 22.7 L )
Max Fuel Consumption2.4 gph ( 9.1 lph )
Gross Horsepower (Maximum)25 hp ( 18.6 kw )
Engine - Option two
Torque (Max)41.7 ft-lb ( 56.5 Nm )
Gross Horsepower (Maximum)25 hp ( 18.6 kw )
Fuel Tank Capacity6 gal ( 22.7 L )
Safety System
Material Thickness.1 in ( .3 cm )
Bottom Feed Stop Bar Diameter2 in ( 5.1 cm )
Diameter2 in ( 5.1 cm )
Material Thickness.1 in ( .3 cm )
Bottom Feed Stop Bar Diameter2 in ( 5.1 cm )
Diameter2 in ( 5.1 cm )
Drum/Disc Cutting System
Knife Thickness.6 in ( 1.5 cm )
Material Capacity6 in ( 15.2 cm )
Width8 in ( 20.3 cm )
Diameter23.9 in ( 60.7 cm )
Thickness1.3 in ( 3.2 cm )
Weight With Shaft176 lbs ( 79.8 kg )
Knife Thickness.6 in ( 1.5 cm )
Material Capacity6 in ( 15.2 cm )
Width8 in ( 20.3 cm )
Diameter23.9 in ( 60.7 cm )
Thickness1.3 in ( 3.2 cm )
Weight With Shaft176 lbs ( 79.8 kg )
Cutter Drive Components - Engine Option One
Static Capacity4460 lbs ( 2023 kg )
Bore1.5 in ( 3.8 cm )
Dynamic Capacity5640 lbs ( 2558.3 kg )
Static Capacity4460 lbs ( 2023 kg )
Bore1.5 in ( 3.8 cm )
Dynamic Capacity5640 lbs ( 2558.3 kg )
Feed System
Feed Roller Clamp Load525 lbs ( 238.1 kg )
Distance from Feed Table to Ground28.1 in ( 71.4 cm )
Infeed Table Width41.2 in ( 104.6 cm )
Infeed Table Length30.2 in ( 76.7 cm )
Weight of Feed Roller100 lbs ( 45.4 kg )
Feed Roller Minimum Distance to Drum4 in ( 10.2 cm )
Infeed Hopper Height22.1 in ( 56.1 cm )
Pinch Point - Distance to End of Feed Table65.4 in ( 166.1 cm )
Feed Roller Clamp Load525 lbs ( 238.1 kg )
Distance from Feed Table to Ground28.1 in ( 71.4 cm )
Infeed Table Width41.2 in ( 104.6 cm )
Infeed Table Length30.2 in ( 76.7 cm )
Weight of Feed Roller100 lbs ( 45.4 kg )
Feed Roller Minimum Distance to Drum4 in ( 10.2 cm )
Infeed Hopper Height22.1 in ( 56.1 cm )
Pinch Point - Distance to End of Feed Table65.4 in ( 166.1 cm )
Discharge System
Top Thickness.1 in ( .3 cm )
Bottom Thickness.1 in ( .3 cm )
Side Wall Thickness.1 in ( .3 cm )
Chute Height97.2 in ( 246.9 cm )
Deflector Thickness.1 in ( .3 cm )
Top Thickness.1 in ( .3 cm )
Bottom Thickness.1 in ( .3 cm )
Side Wall Thickness.1 in ( .3 cm )
Chute Height97.2 in ( 246.9 cm )
Deflector Thickness.1 in ( .3 cm )
Hydraulic System
Pump Flow at Maximum RPM3.8 gpm ( 14.4 L/min )
Tank capacity6.8 gal ( 25.7 L )
System relief pressure2500 psi ( 172.4 bar )
Pump Flow at Maximum RPM3.8 gpm ( 14.4 L/min )
Tank capacity6.8 gal ( 25.7 L )
System relief pressure2500 psi ( 172.4 bar )

    REQUEST A QUOTE

    By submitting this form, you agree to the Terms of Use & our Privacy Policy