Description

The D10x15 S3 Navigator® horizontal directional drill is a reliable, economical solution for small service installation — built to help increase your crew’s productivity so you can go from one job to the next faster. With significant gains in horsepower and speed and a reduction in noise, the D10x15 S3 can help you put more product in the ground in a shorter amount of time.

Engine
Gross Horsepower60 hp ( 44.7 kw )
General Dimensions and Weights
Height (Minimum Transport)66 in ( 167.6 cm )
Width (Minimum Transport)44 in ( 111.8 cm )
Length (Minimum Transport)153 in ( 388.6 cm )
Weight7750 lbs ( 3515.3 kg )
Engine - Option two
Gross Horsepower60 hp ( 44.7 kw )
Engine - Option three
Gross Horsepower60 hp ( 44.7 kw )
Operational
Pullback10000 lbs ( 44.5 kN )
Thrust10000 lbs ( 44.5 kN )
Maximum Carriage Speed at Maximum Engine RPM208 ft/min ( 63.4 m/min )
Maximum Ground Drive Speed at Maximum Engine RPM3.3 mph ( 5.3 km/h )
Maximum Spindle Torque (High at Maximum Engine RPM)1500 ft-lb ( 2033.7 Nm )
Minimum Bore Diameter2.5 in ( 6.4 cm )
Fluid Capacities
Hydraulic System25 gal ( 94.6 L )
Fuel Tank18 gal ( 68.1 L )
Drilling Fluid System Option One
On Board Tank Capacity25 gal ( 94.6 L )
Maximum Flow15 gpm ( 56.8 L/min )
Maximum Pressure750 psi ( 51.7 bar )
Drill Pipe
Minimum Bend Radius95.5 ft ( 29.1 m )
Weight26 lbs ( 11.8 kg )
Joint Inside Diameter.8 in ( 2 cm )
Length6 ft ( 1.8 m )
Hydraulic System
Auxiliary Pump Relief Pressure3000 psi ( 206.8 bar )
Rotation Pump Flow at Maximum Engine RPM29 gpm ( 109.8 L/min )
Rotation Pump Relief Pressure4350 psi ( 299.9 bar )
Thrust/Pullback Pump Flow at Max Engine RPM29 gpm ( 109.8 L/min )
Thrust/Pullback Pump Relief Pressure4350 psi ( 299.9 bar )

    REQUEST A QUOTE

    By submitting this form, you agree to the Terms of Use & our Privacy Policy