The D20x22 S3 Navigator® horizontal directional drill – power, speed, versatility and precise control.
By listening closely to the needs of contractors working in congested urban areas, our goal was to make this S3 drill a perfect fit for your operation — whether you’re installing cable, fiber or product pipe. With nearly 20,000 lb (89 kN) of thrust and pullback, and a Tier 4 Deutz engine that delivers a 12% increase in horsepower over its predecessor (D16x20 Series II Navigator® horizontal directional drill), the D20x22 S3 is the next key addition to your fleet of drills.
| Engine | |
|---|---|
| Displacement | 177 cu-in ( 2.9 L ) |
| Gross Horsepower | 74 hp ( 55.2 kw ) |
| General Dimensions and Weights | |
|---|---|
| Height (Minimum Transport) | 74 in ( 188 cm ) |
| Width (Minimum Transport) | 47.5 in ( 120.7 cm ) |
| Length (Minimum Transport) | 204 in ( 518.2 cm ) |
| Weight | 11700 lbs ( 5307 kg ) |
| Engine - Option two | |
|---|---|
| Displacement | 177 cu-in ( 2.9 L ) |
| Gross Horsepower | 74 hp ( 55.2 kw ) |
| Engine - Option three | |
|---|---|
| Displacement | 177 cu-in ( 2.9 L ) |
| Gross Horsepower | 74 hp ( 55.2 kw ) |
| Operational | |
|---|---|
| Pullback | 19500 lbs ( 86.7 kN ) |
| Thrust | 19500 lbs ( 86.7 kN ) |
| Maximum Carriage Speed in Low at Maximum Engine RPM | 114 ft/min ( 34.7 m/min ) |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 2250 ft-lb ( 3050.6 Nm ) |
| Maximum Carriage Speed at Maximum Engine RPM | 160 ft/min ( 48.8 m/min ) |
| Maximum Ground Drive Speed at Maximum Engine RPM | 3.3 mph ( 5.3 km/h ) |
| Minimum Bore Diameter | 3 in ( 7.6 cm ) |
| Drilling Fluid System Option One | |
|---|---|
| Maximum Flow | 25 gpm ( 94.6 L/min ) |
| Maximum Pressure | 1000 psi ( 68.9 bar ) |