Description
Among them is the 536-hp (399.7-kW) Tier 4 Final/Stage V Caterpillar diesel power plant.
HG4000 European Configuration Horizontal Grinder
Municipal waste facilities, pallet and sawmill operations, and compost contractors alike will appreciate the cost of operation-minded qualities of the all new HG4000 horizontal grinder.
| Engine - Option one | |
|---|---|
| Oil volume with filter | 9 gal ( 34.1 L ) |
| Diesel exhaust fluid capacity | 17.3 gal ( 65.5 L ) |
| Coolant Capacity (Engine and Radiator) | 10.5 gal ( 39.7 L ) |
| Max Fuel Consumption | 27.2 gph ( 103 lph ) |
| Fuel Tank Capacity | 200 gal ( 757.1 L ) |
| Torque (Max) | 1807 ft-lb ( 2450 Nm ) |
| Gross Horsepower (Maximum) | 536 hp ( 399.7 kw ) |
| Standard Infeed System | |
|---|---|
| Infeed roller weight with arm | 2700 lbs ( 1224.7 kg ) |
| Infeed Roller Diameter | 28 in ( 71.1 cm ) |
| Infeed Roller Width | 56 in ( 142.2 cm ) |
| Loading Height | 7.6 ft ( 2.3 m ) |
| Feed Table Capacity | 4.6 cu yd ( 3.5 cu m ) |
| Feed Table Length - Option One | 15 ft ( 4.6 m ) |
| Feed Table Depth | 20 in ( 50.8 cm ) |
| Feed Table Width | 60 in ( 152.4 cm ) |
| Duplex Drum | |
|---|---|
| Tip speed (Duplex) | 9615 ft/min ( 2930.7 m/min ) |
| Drum Weight | 5370 lbs ( 2435.8 kg ) |
| Bearing - Dynamic Capacity | 136000 lbs ( 61688.6 kg ) |
| Bearing - Inner Race Diameter | 4.3 in ( 10.9 cm ) |
| Drum Skin Thickness | 1.5 in ( 3.8 cm ) |
| Drum Cutting Width | 60.9 in ( 154.7 cm ) |
| Drum Diameter | 22.5 in ( 57.2 cm ) |
| Tip Diameter | 31.3 in ( 79.5 cm ) |
| Screens | |
|---|---|
| Screen Area | 3131 sq in ( 20200 sq cm ) |
| Discharge System - Single Belt Design | |
|---|---|
| Load Height | 14 ft ( 4.3 m ) |
| Belt Speed | 625 ft/min ( 190.5 m/min ) |
| Magnetic Drive Roller Diameter | 12.8 in ( 32.5 cm ) |
| Standard Drive Roller Diameter | 12.8 in ( 32.5 cm ) |
| Idler Roller Diameter | 12 in ( 30.5 cm ) |
| Width | 48 in ( 121.9 cm ) |
| Length | 20 ft ( 6.1 m ) |
| Discharge Conveyor Hydraulics | |
|---|---|
| Pump Flow at Maximum RPM | 16.3 gpm ( 61.7 L/min ) |
| Axle/Suspension | |
|---|---|
| Ground Clearance - Option One | 17 in ( 43.2 cm ) |
| Capacity per Axle | 22400 lbs ( 10160.5 kg ) |
| Optional Air Compressor | |
|---|---|
| Tank capacity (Pintle) | 31.7 gal ( 120 L ) |
| Tank capacity (5th wheel) | 21 gal ( 79.5 L ) |
| Maximum Pressure | 125 psi ( 8.6 bar ) |
| Maximum Air Flow | 17.2 cfm ( .5 cmm ) |
| Hydraulic System | |
|---|---|
| Tank capacity | 7.7 gal ( 29.1 L ) |
| General Dimensions and Lengths - Long Infeed | |
|---|---|
| Maximum weight (5th wheel) | 52910 lbs ( 23999.6 kg ) |
| Maximum weight (Pintle) | 55155 lbs ( 25017.9 kg ) |
| Maximum axle weight (5th wheel) | 37478 lbs ( 16999.7 kg ) |
| Maximum axle weight (Pintle) | 52910 lbs ( 23999.6 kg ) |
| Maximum tongue weight (5th wheel) | 15432 lbs ( 6999.8 kg ) |
| Maximum tongue weight (Pintle) | 2200 lbs ( 997.9 kg ) |
| Maximum length - Transport (5th wheel) | 32 ft ( 9.8 m ) |
| Maximum length - Transport (Pintle) | 37 ft ( 11.3 m ) |
| Maximum Height (Transport) | 13 ft ( 4 m ) |
| Maximum Width (Transport) | 8.2 ft ( 2.5 m ) |
| Maximum Length (Operation) | 52 ft ( 15.8 m ) |
| Chipper Drum | |
|---|---|
| Shaft diameter | 5 in ( 12.7 cm ) |
| Tip speed (1-in chip) | 7274 ft/min ( 2217.1 m/min ) |
| Drum Weight | 4707 lbs ( 2135.1 kg ) |
| Bearing - Dynamic Capacity | 136000 lbs ( 61688.6 kg ) |
| Bearing - Inner Race Diameter | 4.3 in ( 10.9 cm ) |
| Drum Skin Thickness | 1.3 in ( 3.3 cm ) |
| Drum Diameter | 27.3 in ( 69.3 cm ) |
| Drum Cutting Width | 60 in ( 152.4 cm ) |