The SC382 was made for the tough stumps on your jobsite.
This SC382 Vermeer stump cutter is equipped with a 37 hp (26.1 kW) EFI Briggs and Stratton Vanguard engine. The optimized cutting wheel on the SC382 gives this machine aggressive cutting capabilities. Along with standard four-wheel drive and the optional front blade, this model is the full package for stump cutting from start to finish.
| General Dimensions and Weights | |
|---|---|
| Weight With Chip Blade Option (Additional) | 85 lbs ( 38.6 kg ) |
| Overall Width Transport (without duals) | 35.5 in ( 90.2 cm ) |
| Length | 118 in ( 299.7 cm ) |
| Width | 50.1 in ( 127.3 cm ) |
| Height | 53 in ( 134.6 cm ) |
| Weight - Engine Option One | 1950 lbs ( 884.5 kg ) |
| Engine - Option one | |
|---|---|
| Torque (Max) | 49 ft-lb ( 66.4 Nm ) |
| Fuel Tank Capacity | 10 gal ( 37.9 L ) |
| Max Fuel Consumption | 3.2 gph ( 12.1 lph ) |
| Gross Horsepower (Maximum) | 37 hp ( 27.6 kw ) |
| Oil Volume with Filter | 2.5 qt ( 2.4 L ) |
| Cutterwheel System | |
|---|---|
| Chip Containment | 7.5 cu ft ( .2 cu m ) |
| Cutterwheel Cut Below Ground | 15 in ( 38.1 cm ) |
| Cutterwheel Cut Above Ground | 24 in ( 61 cm ) |
| Cutterwheel Straight Line Dimension | 47 in ( 119.4 cm ) |
| Cutterwheel Diameter without Teeth | 17 in ( 43.2 cm ) |
| Cutterwheel Thickness | .5 in ( 1.3 cm ) |
| Option One | |
|---|---|
| Blade Travel Above Ground | 8 in ( 20.3 cm ) |
| Blade Travel Below Ground | 2.5 in ( 6.4 cm ) |
| Ground Drive | |
|---|---|
| Low Speed Travel | 65 ft/min ( 19.8 m/min ) |
| High Speed Travel | 130 ft/min ( 39.6 m/min ) |
| Hydraulic System | |
|---|---|
| System relief pressure | 2470 psi ( 170.3 bar ) |
| Tank capacity | 6.5 gal ( 24.6 L ) |
| Pump Flow at Maximum RPM | 6.4 gpm ( 24.2 L/min ) |